TU.425/12

FLOW METER WITH ULTRASONIC SENSOR

THE DSP TECHNOLOGY (DIGITAL SIGNAL PROCESSING) ENSURE A LOW SENSIBILITY OF THE INSTRUMENT AGAINST POTENTIAL TRANSIENT FACTORS. THE SIZE OF THE PIPE MAY VARY 20 ÷ 4000 MM (USING DIFFERENT TRANSDUCERS). SINCE THE TRANSDUCERS ARE APPLIED EXTERNALLY TO THE TUBE, NOT IN CONTACT WITH THE LIQUID AND HAVE NO MOVING PARTS, THE TRANSMITTER WILL NOT BE DAMAGED BY WEAR, BY FOULING OR PRESSURE
All CONFIGURATION USER-ENTERED VALUES are saved inEE PROM, PW protected
The Transmitter is EQUIPPED WITH A CLOCK TO STORE THE MEASURE DETECTION DATE AND TIME operated by battery
IN CASE OF POWER FAILURE will be necessary TO RE-SET THE LOST. IN CASE OF INCORRECT SETTING OF THE TOTALIZER, THE OTHER FUNCTIONS ARE NOT COMPROMISED
Is composed by a DIGITAL CONVERTER AND 2 CLAMP-ON OR INSERTION ULTRASONIC TRANSDUCERS

TECHNICAL FEATURES

RANGE 0,7÷12 mt
ACCURACY ±0,5% V.L.
RESOLUTION 0,2 mm
TRANSMISSION ANGLE
TEMPERATURE COMPENS. PT.100 -30 ÷ +80 °C
VISUALIZATION LED red (power-on), yellow LED (eco signal)
POWER SUPPLY 24 VAC, consuption 1W
COMMUNICATION PORT RS485
WORKING TEMPERATURE -30 ÷ +80 °C
PRESSURE 0,5 ÷ 1,5 bar
PROTECTION/ELECTRICAL CONNECTION IP68 with outgoing cavle 4 pin 3 m, IP65 with screw connector+5 m cable with connector
MATERIAL PP
DIMENSIONS 90x109 mm (ØxI) mechanical installation 1”G.M.
This website uses third-party cookies to improve our services and analyze traffic. Update information about your browsing are shared with these third parties. Browsing the site you agree to the use of cookies.